Logitech – Mobility – Foswiki
webcam logitech quickcam talk
Both work very well. Driver: pwc/pwcx.
The fresh pwc-only driver works well with my four thousand at 640×480. A excellent improvement over the Labtec listed below. Note that the five thousand is not yet supported by the pwc driver.
There seems to be no actual driver available for kernel >Two.6.28. :-/ — NikolaiBerlin – five May two thousand nine
Logitech Sphere
Pan and tilt is supported by Movability. You need a faily fresh pwc/pwcx driver to use pan/tilt. See also this FAQ entry: FrequentlyAskedQuestions#I_get_errors_with_Logitech_Spher . See also LogitechSphereControl.
Logitech Quickcam Zoom (Fresh Model)
Works fairly well with the pwc driver. When loading the module, use the parameter: power_save=1 in order for the camera to work. Picture quality and light sensitivity are much better than my previous Creative Webcam Pro.
Logitech Communicate
It works ideal using the driver from http://home.mag.cx/messenger/ (modified qc-usb)
— Wouter de Vries – twenty Oct two thousand five
Logitech Quickcam Web
Works very well at 320×240 with Cambozola applet and MjpegProxyGrab !
Logitech QuickCam Talk
Another Fry’s special ($22.99 with $20 rebate on 12/26/06). I had a bit of a hassle getting /dev/video0 to show up – evidently the camera needed the gspca driver, not the spca5xx driver (lsusb gives ID 046d:092e Logitech, Inc.). Albeit the box states "Movie capture: 640×480 pixels (SW enhanced)" and also "Quality CIF (352×288) CMOS webcam", setting the resolution to 640×480 in movement.conf crashes motility, and 352×288 gives no pic – 320×240 works. Here is my mascot:
Logitech OrbitMP ( two thousand six model, 046d:08cc )
This webcam is a fresh "evolution" of logitech sphere/orbit that works with pwc. It supports MPJEG and YUYV palettes using uvcvision driver ( svn -r79 ).
Tested with motility svn r164.
Logitech Quickcam Fusion
Works wonderfully. Some caveats during running: only shows up to work with SVN release of uvcvideo, in non-daemon (-n) mode. Also a little spotty with the driver.
My workflow for running the device looks something like:
# chmod six hundred sixty four /usr/v4l/video0
$ screen -dmS mobility movement -n
Which reinitializes uvcvideo, switches the permissions such that a regular user can read the device, then starts movability in a screen session as a normal user.
Logitech Quickcam for Notebooks Pro (Old model)
.. work very well with movement. No specific movement configuration.
Logitech Quickcam Pro 9000
Works. Tested with maneuverability Three.Two.12, Ubuntu 11.Ten.
Logitech Quickcam Ultra
.. had to use mjpg-streamer to make it into a netcam. Uses lots more cpu this way.
— Jon Zeeff – twenty nine Sep two thousand nine
Logitech 1080p C910
.. works well out of the box, no custom-made config required. Using Ubuntu 9.Ten, motility Trio.Two.11. Only issue is that I cannot get 1600×1200 resolution to work yet, I simply get a black photo. 1280×720 works flawlessly – very nice pic from this camera with Zeiss optics.
Logitech C310
Works on a Raspberry Pi running Raspbian Wheezy and motility Three.Two.12. (didn’t test it on a real machine)
I had to rebuild libjpeg8 to get MJPEG to work without echoing the "Corrupt JPEG data: X extraneous bytes before marker" error.
dennismv/corruptjpeg.html) on how to fix it.
— Benoit – six October two thousand twelve
Logitech C270 (720p)
Works out of the box without any custom-built configuration. Using Debian Wheezy (testing) with motility Trio.Two.12.
— Szewski – nine May two thousand eleven
Does not work with Maneuverability on Ubuntu Ten.04 64-bit. It outputs this error: Corrupt JPEG data: one extraneous bytes before marker 0xd3 [1] mjpegtoyuv420p: Corrupt photo . proceed .
Works out of the box with Mobility on Ubuntu 12.04 64-bit.
Logitech C210
Logitech C920
Works on a Raspberry Pi running Raspbian Wheezy and movability Three.Two.12.
Works @ two thousand three hundred four x 1536, albeit at
1 fps. Works at a range of resolutions listed under
Logitech C905
Works well @640×480, @800×480, @768×576 (auto converting to 800×600, but direct 800×600 doesn’t work), @1280×720 (only Ubuntu).
Works on Raspbian Wheezy with maneuverability Trio.Two.12 on a Raspberry PI model B at 1-3 fps.
Works on old Dual-core laptop Ubuntu 12.04.Two LTS with mobility Three.Two.12 at 10fps
Logitech – Movement – Foswiki
Без кейворда
Both work very well. Driver: pwc/pwcx.
The fresh pwc-only driver works well with my four thousand at 640×480. A fine improvement over the Labtec listed below. Note that the five thousand is not yet supported by the pwc driver.
There seems to be no actual driver available for kernel >Two.6.28. :-/ — NikolaiBerlin – five May two thousand nine
Logitech Sphere
Pan and tilt is supported by Movability. You need a faily fresh pwc/pwcx driver to use pan/tilt. See also this FAQ entry: FrequentlyAskedQuestions#I_get_errors_with_Logitech_Spher . See also LogitechSphereControl.
Logitech Quickcam Zoom (Fresh Model)
Works fairly well with the pwc driver. When loading the module, use the parameter: power_save=1 in order for the camera to work. Picture quality and light sensitivity are much better than my previous Creative Webcam Pro.
Logitech Communicate
It works ideal using the driver from http://home.mag.cx/messenger/ (modified qc-usb)
— Wouter de Vries – twenty Oct two thousand five
Logitech Quickcam Web
Works very well at 320×240 with Cambozola applet and MjpegProxyGrab !
Logitech QuickCam Talk
Another Fry’s special ($22.99 with $20 rebate on 12/26/06). I had a bit of a hassle getting /dev/video0 to show up – evidently the camera needed the gspca driver, not the spca5xx driver (lsusb gives ID 046d:092e Logitech, Inc.). Albeit the box states "Movie capture: 640×480 pixels (SW enhanced)" and also "Quality CIF (352×288) CMOS webcam", setting the resolution to 640×480 in maneuverability.conf crashes maneuverability, and 352×288 gives no photo – 320×240 works. Here is my mascot:
Logitech OrbitMP ( two thousand six model, 046d:08cc )
This webcam is a fresh "evolution" of logitech sphere/orbit that works with pwc. It supports MPJEG and YUYV palettes using uvcvision driver ( svn -r79 ).
Tested with motility svn r164.
Logitech Quickcam Fusion
Works wonderfully. Some caveats during running: only emerges to work with SVN release of uvcvideo, in non-daemon (-n) mode. Also a little spotty with the driver.
My workflow for running the device looks something like:
# chmod six hundred sixty four /usr/v4l/video0
$ screen -dmS motility movement -n
Which reinitializes uvcvideo, switches the permissions such that a regular user can read the device, then starts movement in a screen session as a normal user.
Logitech Quickcam for Notebooks Pro (Old model)
.. work very well with mobility. No specific maneuverability configuration.
Logitech Quickcam Pro 9000
Works. Tested with movability Trio.Two.12, Ubuntu 11.Ten.
Logitech Quickcam Ultra
.. had to use mjpg-streamer to make it into a netcam. Uses lots more cpu this way.
— Jon Zeeff – twenty nine Sep two thousand nine
Logitech 1080p C910
.. works well out of the box, no custom-built config required. Using Ubuntu 9.Ten, maneuverability Three.Two.11. Only issue is that I cannot get 1600×1200 resolution to work yet, I simply get a black pic. 1280×720 works flawlessly – very nice picture from this camera with Zeiss optics.
Logitech C310
Works on a Raspberry Pi running Raspbian Wheezy and motility Trio.Two.12. (didn’t test it on a real machine)
I had to rebuild libjpeg8 to get MJPEG to work without echoing the "Corrupt JPEG data: X extraneous bytes before marker" error.
dennismv/corruptjpeg.html) on how to fix it.
— Benoit – six October two thousand twelve
Logitech C270 (720p)
Works out of the box without any custom-made configuration. Using Debian Wheezy (testing) with maneuverability Three.Two.12.
— Szewski – nine May two thousand eleven
Does not work with Motility on Ubuntu Ten.04 64-bit. It outputs this error: Corrupt JPEG data: one extraneous bytes before marker 0xd3 [1] mjpegtoyuv420p: Corrupt photo . proceed .
Works out of the box with Movement on Ubuntu 12.04 64-bit.
Logitech C210
Logitech C920
Works on a Raspberry Pi running Raspbian Wheezy and mobility Three.Two.12.
Works @ two thousand three hundred four x 1536, albeit at
1 fps. Works at a range of resolutions listed under
Logitech C905
Works well @640×480, @800×480, @768×576 (auto converting to 800×600, but direct 800×600 doesn’t work), @1280×720 (only Ubuntu).
Works on Raspbian Wheezy with maneuverability Three.Two.12 on a Raspberry PI model B at 1-3 fps.
Works on old Dual-core laptop Ubuntu 12.04.Two LTS with movability Three.Two.12 at 10fps
Logitech – Movability – Foswiki
Без кейворда
Both work very well. Driver: pwc/pwcx.
The fresh pwc-only driver works well with my four thousand at 640×480. A excellent improvement over the Labtec listed below. Note that the five thousand is not yet supported by the pwc driver.
There seems to be no actual driver available for kernel >Two.6.28. :-/ — NikolaiBerlin – five May two thousand nine
Logitech Sphere
Pan and tilt is supported by Motility. You need a faily fresh pwc/pwcx driver to use pan/tilt. See also this FAQ entry: FrequentlyAskedQuestions#I_get_errors_with_Logitech_Spher . See also LogitechSphereControl.
Logitech Quickcam Zoom (Fresh Model)
Works fairly well with the pwc driver. When loading the module, use the parameter: power_save=1 in order for the camera to work. Picture quality and light sensitivity are much better than my previous Creative Webcam Pro.
Logitech Communicate
It works ideal using the driver from http://home.mag.cx/messenger/ (modified qc-usb)
— Wouter de Vries – twenty Oct two thousand five
Logitech Quickcam Web
Works very well at 320×240 with Cambozola applet and MjpegProxyGrab !
Logitech QuickCam Talk
Another Fry’s special ($22.99 with $20 rebate on 12/26/06). I had a bit of a hassle getting /dev/video0 to show up – evidently the camera needed the gspca driver, not the spca5xx driver (lsusb gives ID 046d:092e Logitech, Inc.). Albeit the box states "Movie capture: 640×480 pixels (SW enhanced)" and also "Quality CIF (352×288) CMOS webcam", setting the resolution to 640×480 in motility.conf crashes movement, and 352×288 gives no photo – 320×240 works. Here is my mascot:
Logitech OrbitMP ( two thousand six model, 046d:08cc )
This webcam is a fresh "evolution" of logitech sphere/orbit that works with pwc. It supports MPJEG and YUYV palettes using uvcvision driver ( svn -r79 ).
Tested with maneuverability svn r164.
Logitech Quickcam Fusion
Works wonderfully. Some caveats during running: only emerges to work with SVN release of uvcvideo, in non-daemon (-n) mode. Also a little spotty with the driver.
My workflow for running the device looks something like:
# chmod six hundred sixty four /usr/v4l/video0
$ screen -dmS motility maneuverability -n
Which reinitializes uvcvideo, switches the permissions such that a regular user can read the device, then starts mobility in a screen session as a normal user.
Logitech Quickcam for Notebooks Pro (Old model)
.. work very well with mobility. No specific motility configuration.
Logitech Quickcam Pro 9000
Works. Tested with maneuverability Trio.Two.12, Ubuntu 11.Ten.
Logitech Quickcam Ultra
.. had to use mjpg-streamer to make it into a netcam. Uses lots more cpu this way.
— Jon Zeeff – twenty nine Sep two thousand nine
Logitech 1080p C910
.. works well out of the box, no custom-made config required. Using Ubuntu 9.Ten, movement Three.Two.11. Only issue is that I cannot get 1600×1200 resolution to work yet, I simply get a black pic. 1280×720 works flawlessly – very nice photo from this camera with Zeiss optics.
Logitech C310
Works on a Raspberry Pi running Raspbian Wheezy and motility Trio.Two.12. (didn’t test it on a real machine)
I had to rebuild libjpeg8 to get MJPEG to work without echoing the "Corrupt JPEG data: X extraneous bytes before marker" error.
dennismv/corruptjpeg.html) on how to fix it.
— Benoit – six October two thousand twelve
Logitech C270 (720p)
Works out of the box without any custom-built configuration. Using Debian Wheezy (testing) with movability Three.Two.12.
— Szewski – nine May two thousand eleven
Does not work with Maneuverability on Ubuntu Ten.04 64-bit. It outputs this error: Corrupt JPEG data: one extraneous bytes before marker 0xd3 [1] mjpegtoyuv420p: Corrupt picture . proceed .
Works out of the box with Motility on Ubuntu 12.04 64-bit.
Logitech C210
Logitech C920
Works on a Raspberry Pi running Raspbian Wheezy and mobility Trio.Two.12.
Works @ two thousand three hundred four x 1536, albeit at
1 fps. Works at a range of resolutions listed under
Logitech C905
Works well @640×480, @800×480, @768×576 (auto converting to 800×600, but direct 800×600 doesn’t work), @1280×720 (only Ubuntu).
Works on Raspbian Wheezy with maneuverability Three.Two.12 on a Raspberry PI model B at 1-3 fps.
Works on old Dual-core laptop Ubuntu 12.04.Two LTS with movability Trio.Two.12 at 10fps